150mm Conventional Alarm Bell
Features:
- Low current consumption
- Quickly and easily installed
- Excellent Sonorous tone
- 95dBA at 1 metre
- Slim Profile
- Fully suppressed and polarised
- Multi fixing base plate
|
 |
200mm Conventional Weatherproof Alarm Bell
Features:
- Quickly and easily installed
- Excellent Sonorous tone 95dBA at 1m
- Fully suppressed and polarised
- Multi fixing base plate
- Weatherproof to IPxx
|
 |
Conventional ACDC Duct Sensor Detector
Features:
- 24Vdc or 24Vac operation
- Sounder output
- Remote LED output
- Equipped with DPDT auxilary relay contacts
- Air velocity rating from 2.5 m/s to 20 m/s
- Remote test station and remote annunciator accessories
- Clear polycarbonate cover for easy visual inspection of sampling tube filters
- Suits round or rectangular ducts 0.3 - 3.6m wide
|
 |
Conventional Base Mtd Sounder
Features:
- Ceiling mounted base sounder
- 78-93dBA at 1 metre at 24Vdc
- Internal volume control
- Rugged construction, IP44 rated
- Easy cable entry & exit
- Designed to meet EN54: part 3
- CE marked
|
 |
Conventional Beam Detector
Features:
- 10-100m range - up to 1500m2 coverage
- Alignment LED's simplifying installation
- Automatic gain control compensating for drift in signal level
- Voltage free alarm and fault contacts
- Ceiling or wall mounted
- Designed to comply with BS 5839: part 5, 1988
|
 |
Conventional Combined TxRx Beam Detector cw Reflector
Features:
- Combined transmitter and receiver unit
- Range 10 - 100 metres
- Sensitivity/threshold adjustment
- Operates in the visible light spectrum
- Visual LED indicators to aid alignment of beam
- Standby, fault and alarm LED indicators
- Integral horizontal and vertical beam alignment
- Drift compenation
- Optional - remote engineers switch
- Optional - heat pad kits and filters
|
 |
Conventional Fixed Temp Thermal Detector
Features:
- Range 1 fixed temperature detector which provides a 78°C fixed tempereature alarm point
- Low current draw
- Remote LED output as standard
- Simple plug-in installation
- Broad range of adapter bases
- Built-in test switch
- Built-in tamper-resistance switch
- Two alarm LEDs provide 360° visibility
|
 |
Conventional Ionisation Detector
Features:
- Low profile design
- Low current draw
- Remote LED output as standard
- Two alarm LEDs provide 360° visibility
- Stable performance in high air velocities
- Removable cover for ease of maintenance
- Broad range of adapter bases
- Built-in test switch
- Tamper-resistant
- LPCB approved to EN54 part 7 (1982)
|
 |
Conventional Manual Call Point
Features:
- Safe and reliable
- LPCB certified to BS5839: part 2: 1983
- Available with or without internal resistor
- Flush or surface mounting
- IP24D rating
- Terminals for up to 2.5mm2 conductors
- Complementary range of accessories
|
 |
Conventional PhotoElectric Detector
Features:
- Low profile design
- Low current draw
- Remote LED output as standard
- Two alarm LEDs provide 360° visibility
- Removable cover for ease of maintenance
- Broad range of adapter bases
- Built-in test switch
- Tamper-resistant
- LPCB approved to EN54 part 7 (1982)
|
 |
Conventional RateofRise Thermal Detector
Features:
- Rate of rise, grade 1 response detector
- Low current draw
- Remote LED output as standard
- Simple plug-in installation
- Broad range of adapter bases
- Built-in test switch
- Built-in tamper-resistant feature
- Two alarm LEDs provide 360° visibility
- LPCB approved to EN54 part 5, grade 1 (1976)
|
 |
Conventional Wall Mtd SndrSrobe
Features:
- Combined sounder and strobe
- 88-103dB(A) adjustable output
- Internal volume control
- Wall mounting
- Large strobe lens
- Rugged construction
- IP44, IP55 or IP66 rated
- Easy cable entry & exit
- Designed to meet EN54: pt 3
- CE marked
|
.jpg) |
Conventional Wall Mtd Sounder
Features:
- 88-103dB(A) adjustable output
- Internal volume control
- Wall mounting sounder
- Rugged construction
- IP44, IP55, IP66 rated
- Easy cable entry & exit
- Designed to meet EN54: pt 3
- CE marked
|
.jpg) |
Conventional Wall Mtd Strobe
Features:
- Xenon strobe unit
- Stand alone operation
- Large strobe lens
- IP44, IP55, IP66 rated
- Easy cable entry & exit
- Seperate terminals for in/out wiring
- CE marked
|
.jpg) |
Conventional Weather Res Manual Call Point
Features:
- Safe and reliable
- LPCB certified to BS5839: part 2: 1983
- IP67 rated
- Terminals for up to 2.5mm2 conductors
- Complementary range of accessories
- Intrinsically safe option
|
 |
Remote Indicator Unit
Features:
- Industrial construction
- Terminal blockwiring
- Ultra-bright LED
- Suitable for analogue addressable or conventional systems
|
 |
